A custom replica of the Pilatus PC-21 jet trainer, this 600mm wingspan version is
designed to be powered by a 2804 2300kv electric out-runner and printed
in LW-PLA this model looks as fantastic in air as it does on the
ground. filled with scale details such as;
- spinner
- clear canopy
- intakes and exhausts
- control surface balance tabs
This model is recommended for the late beginner pilot and on-wards to expert.
Included with this file:
WINGSPAN 600mm (23.6in)
LENGTH 750mm (25.9in)
PRINT WEIGHT 210g (7.5oz)
TAKEOFF WEIGHT 340g (12.1oz)
WING LOADING 54g/dm2 (17.8oz/ft2)
REQUIRED COMPONENTS:
X1 2804 2300KV MOTOR (or similar)
X1 20AMP ESC
X1 950MAH 2S LIPO OR SIMILAR
X4 3.7G MICRO SERVO
X2 BAMBOO SKEWERS
HEAT SHRINK TUBE 3mm
X2 10mm X10mm X 2mm MAGNET (ROUND)
X10 MICRO HINGES
VELCRO
X2 x 200mm carbon strip 3mm x 0.6mm (optional)
M2 x10mm screws
MINIMUM PRINT VOLUME:
200x200x200
For any questions and assistance please email us at:
NOTE: All STL files need to enlarged to 1000% if using a program other than simplify3d.
Free download of instruction manual and parts list here
Based on 0 Ratings