A custom variant on the pushy cat, this 800mm wingspan version is powered by your choice of pusher style electric out-runner (suggeest 28 size)
LENGTH 890mm (35 in)
PRINT WEIGHT 450g (16oz)
FLYING WEIGHT 745g (26.6oz)
CHANNELS 3 (aileron, elevator, throttle)
Free download of sample parts, instruction manual, settings guide and parts list HERE
INCLUDED:
Factory files for Simplify 3d
G-code files
STL files for all components
Cura profiles for LW-PLA and regular PLA
Detailed assembly manual and user guide
Print settings guide for all parts
REQUIRED ITEMS:
X1 2826 2200KV MOTOR (or similar)
X1 30AMP ESC
X1 2200MAH 3S LIPO OR SIMILAR
X1 6x4 or 5x5 propeller
X2 9G Servos (Aileron)
X1 JX HV0903MG Slim Servo (elevator)
BAMBOO SKEWERS 3MM
X2 10mm X 10mm X 2mm MAGNET (ROUND)
X6 16mm x 29mm HINGES
VELCRO
X1 10mm x 8mm x 300mm carbon tube or pine rod (OPTIONAL)
M2 screws
1mm or 1.5mm steel rod
RC Groups build thread-
https://www.rcgroups.com/forums/showthread.php?3668875-Stingray-800-pusher-(3D-Aeroworks)/page2
For any questions or assistance please email us at:
Based on 0 Ratings